Plasma TV VideoSecu Tilt TV Wall Mount
Mounted my Samsung 50" plasma using this mount. My display is about 70 pounds.
Plasma TV VideoSecu Tilt TV Wall Mount
Installation was fairly simple. The back plate is 30 inches wide, so you will only be able to get 2 studs max. Important points:
Plasma TV VideoSecu Tilt TV Wall Mount
1. It is very important to make sure the lag bolts drill into the studs.
2. The included hardware is iffy, so go spend the $5 at your local hardware store and get some better bolts.
3. The level on the back plate is not 100% accurate, so make sure to use your own.
The important thing to to measure where you want your holes and then measure them again and then make sure everything is level.
Plasma TV VideoSecu Tilt TV Wall Mount
Installation was fairly simple. The back plate is 30 inches wide, so you will only be able to get 2 studs max. Important points:
Plasma TV VideoSecu Tilt TV Wall Mount
1. It is very important to make sure the lag bolts drill into the studs.
2. The included hardware is iffy, so go spend the $5 at your local hardware store and get some better bolts.
3. The level on the back plate is not 100% accurate, so make sure to use your own.
The important thing to to measure where you want your holes and then measure them again and then make sure everything is level.
Plasma TV VideoSecu Tilt TV Wall Mount
The construction of the mount and rails felt very sturdy.
For those that have never mounted a tv before there are 2 parts. A back plate that bolts on to your wall and then 2 rails that bolt onto the back of your display. You then place your display on the backplate. The rails have hooks to secure it onto the plate and then screws at the bottom to make sure it doesn't come off.
For those that have never mounted a tv before there are 2 parts. A back plate that bolts on to your wall and then 2 rails that bolt onto the back of your display. You then place your display on the backplate. The rails have hooks to secure it onto the plate and then screws at the bottom to make sure it doesn't come off.
Plasma TV VideoSecu Tilt TV Wall Mount
Distance between the back of the display and the wall is about 2.25 inches. This is fairly tight and makes it difficult to hook up cables, so make sure your cables are hooked up before mounting the display.
Plasma TV VideoSecu Tilt TV Wall Mount
